Grooved reducing tee

ciri-ciri:

Sijil: FM Approved / UL Listed / LPCB

Size: 2″*1″ – 8″*6″ (DN 50*25 – DN 200*150)

Tekanan: 300PSI/500PSI

Bahan: ASTM A536, GRED 65-45-12, QT450-10

Berutas: ASME B1.20.1, ISO 7-1, GB 7306

Alur: AWWA C606, ISO 6182-12

Permukaan: P: Bercat E: Bersadur Elektronik B: Hitam S: Epoksi G: Bergalvani celup panas

Sembang Sekarang

Butiran produk

Grooved reducing tee is a T-shaped pipe fitting used in piping systems to connect three pipes of varying diameters, allowing fluid or gas to split or merge with different flow size.

SAIZ		SAIZ OD	L (MM)
2″×1″	DN50×DN25	60.3X33.7	70
2″×1 1/4″	DN50×DN32	60.3X42.4	70
2″×1 1/2″	DN50×DN40	60.3X48.3	70
2 1/2″×1 1/4″	DN65×DN32	73.0X42.4	76
2 1/2″×1 1/2″	DN65×DN40	73.0X48.3	76
2 1/2″×2″	DN65×DN50	73.0X60.3	76
2 1/2″×1 1/2″	DN65×DN40	76.1X48.3	76
2 1/2″×2″	DN65×DN50	76.1X60.3	76
3″×1 1/2″	DN80×DN40	88.9X48.3	86
3″×2″	DN80×DN50	88.9X60.3	86
3″×2 1/2″	DN80×DN65	88.9X73.0	86
3″×2 1/2″	DN80×DN65	88.9X76.1	86
4″×2 1/2″	DN100×DN65	108.0X76.1	102
4″×3″	DN100×DN80	108.0X88.9	102
4″×2″	DN100×DN50	114.3X60.3	102
4″×2 1/2″	DN100×DN65	114.3X73.0	102
4″×2 1/2″	DN100×DN65	114.3X76.1	102
4″×3″	DN100×DN80	114.3X88.9	102
5″×2″	DN125×DN50	139.7X60.3	124
5″×3″	DN125×DN80	139.7X88.9	124
5″×4″	DN125×DN100	139.7X114.3	124
6″×2 1/2″	DN150×DN65	159.0X76.1	140
6″×3″	DN150×DN80	159.0X88.9	140
6″×4″	DN150×DN100	159.0X108.0	140
6″×4″	DN150×DN100	159.0X114.3	140
6″×2″	DN150×DN50	165.1X60.3	140
6″×2 1/2″	DN150×DN65	165.1X76.1	140
6″×3″	DN150×DN80	165.1X88.9	140
6″×4″	DN150×DN100	165.1X114.3	140
6″×5″	DN150×DN125	165.1X139.7	140
6″×2″	DN150×DN50	168.3X60.3	140
6″×2 1/2″	DN150×DN65	168.3X73.0	140
6″×2 1/2″	DN150×DN65	168.3X76.1	140
6″×3″	DN150×DN80	168.3X88.9	140
6″×4″	DN150×DN100	168.3X114.3	140
8″×4″	DN200×DN100	219.1X114.3	175
8″×5″	DN200×DN125	219.1X139.7	175
8″×6″	DN200×DN150	219.1X159.0	175
8″×6″	DN200×DN150	219.1X165.1	175
8″×6″	DN200×DN150	219.1X168.3	175