Grooved reducing tee

Gegroefde reductie-T-stuk

Functies:

Certificaat: FM-goedgekeurd / UL-vermeld / LPCB

Size: 2″*1″ – 8″*6″ (DN 50*25 – DN 200*150)

Druk: 300PSI/500PSI

Materiaal: ASTM A536, KLASSE 65-45-12, QT450-10

Met schroefdraad: ASME B1.20.1, ISO 7-1, GB 7306

Groef: AWWA C606, ISO 6182-12

Oppervlakte: P: Geverfd E: Gegalvaniseerd B: Zwart S: Epoxy G: Thermisch verzinkt

Chat nu

Productdetails

Gegroefde reductie-T-stuk is a T-shaped pipe fitting used in piping systems to connect three pipes of varying diameters, allowing fluid or gas to split or merge with different flow size.

MAAT		OD-GROOTTE	L (MM)
2″×1″	DN50×DN25	60,3X33,7	70
2″×1 1/4″	DN50×DN32	60,3X42,4	70
2″×1 1/2″	DN50×DN40	60,3X48,3	70
2 1/2″×1 1/4″	DN65×DN32	73.0X42.4	76
2 1/2″×1 1/2″	DN65×DN40	73.0X48.3	76
2 1/2″×2″	DN65×DN50	73.0X60.3	76
2 1/2″×1 1/2″	DN65×DN40	76.1X48.3	76
2 1/2″×2″	DN65×DN50	76.1X60.3	76
3″×1 1/2″	DN80×DN40	88,9X48,3	86
3″×2″	DN80×DN50	88,9X60,3	86
3″×2 1/2″	DN80×DN65	88,9X73,0	86
3″×2 1/2″	DN80×DN65	88.9X76.1	86
4″×2 1/2″	DN100×DN65	108.0X76.1	102
4″×3″	DN100×DN80	108.0X88.9	102
4″×2″	DN100×DN50	114,3X60,3	102
4″×2 1/2″	DN100×DN65	114,3X73,0	102
4″×2 1/2″	DN100×DN65	114,3X76,1	102
4″×3″	DN100×DN80	114,3X88,9	102
5″×2″	DN125×DN50	139,7X60,3	124
5″×3″	DN125×DN80	139,7X88,9	124
5″×4″	DN125×DN100	139,7X114,3	124
6″×2 1/2″	DN150×DN65	159.0X76.1	140
6″×3″	DN150×DN80	159.0X88.9	140
15×10 cm	DN150×DN100	159.0X108.0	140
15×10 cm	DN150×DN100	159.0X114.3	140
6″×2″	DN150×DN50	165.1X60.3	140
6″×2 1/2″	DN150×DN65	165.1X76.1	140
6″×3″	DN150×DN80	165.1X88.9	140
15×10 cm	DN150×DN100	165.1X114.3	140
15×13 cm	DN150×DN125	165,1X139,7	140
6″×2″	DN150×DN50	168,3X60,3	140
6″×2 1/2″	DN150×DN65	168,3X73,0	140
6″×2 1/2″	DN150×DN65	168,3X76,1	140
6″×3″	DN150×DN80	168,3X88,9	140
15×10 cm	DN150×DN100	168,3X114,3	140
20 x 10 cm	DN200×DN100	219.1X114.3	175
8″×5″	DN200×DN125	219.1X139.7	175
8″×6″	DN200×DN150	219.1X159.0	175
8″×6″	DN200×DN150	219.1X165.1	175
8″×6″	DN200×DN150	219.1X168.3	175