Female Threaded Tee Fig 130 BSPT Malleable Iron BS EN

Female Threaded Tee Fig 130 BSPT Malleable Iron BS EN

Product Overview

This Malleable Iron Female Tee Fig 130 BSPT  is a pipe fitting made of malleable iron, primarily used in fire protection, plumbing, and industrial piping systems to create T-shaped branch connections. Featuring three female threaded ends, it allows for direct connection to male threaded pipes or fittings, effectively solving the issues of spatial layout and connection reliability during pipeline branching.

Are you looking for a pipe fitting that meets the strict standards of fire protection systems while flexibly adapting to the complex branching needs of pipe networks?

Our Female Tee Fig 130 BSPT  is manufactured with precision casting to ensure structural strength and sealing performance, enabling stable operation under high-pressure and high-temperature conditions.

Available in a variety of nominal sizes and surface finishes (black, hot-dip galvanized), it is perfectly suited for a wide range of applications, from residential and commercial buildings to industrial facilities.

drawing

Product details

drawing

Product Features

  • Material: Malleable Iron
  • Connection: Three female threaded ends
  • Nominal Sizes: 1/2″, 3/4″, 1″, 1-1/4″, 1-1/2″, 2″, 2-1/2″, 3″, 4″
  • Thread Standards: NPT, BSPT
  • Max Working Pressure: 1.6 MPa (232 psi)
  • Working Temperature: -20°C ~ 120°C (-4°F ~ 248°F)
  • Surface Treatments: Black, Hot-dip Galvanized
  • Certifications: UL Listed, FM Approved

Specification Table:

Size

(Inch)

Nominal Diameter

(DN)

Center-to-End A

(mm)

Center-to-End B

(mm)

Thread Length

(mm)

Wall Thickness

(mm)

Pressure Rating

(Psi)

1/2″ 15 27 27 13.2 2.8 300
3/4″ 20 32 32 14.5 2.9 300
1″ 25 38 38 16.8 3.2 300
1-1/4″ 32 48 48 19.1 3.5 300
1-1/2″ 40 54 54 19.1 3.8 300
2″ 50 66 66 22.2 4.2 300

Note: Dimensions are for reference only. Exact specifications may vary by manufacturer.

Product Applications

 

  • Intended Use:This product is primarily used as a pipeline branch connector in fire sprinkler systems, HVAC systems, water supply and drainage systems, and industrial gas/liquid transmission pipelines. In fire protection systems, it ensures that sprinkler pipes can flexibly branch to precisely cover all protected areas; in industrial applications, it can adapt to corrosive environments and high-pressure working conditions, reliably distributing medium flow.
  • Compatibility:It can be directly connected to carbon sTee Fig 130 BSPT l, stainless sTee Fig 130 BSPT l, galvanized sTee Fig 130 BSPT l pipes, and malleable iron fittings that meet NPT or BSPT standards. It is recommended to use with pipes of the same material or anti-corrosion treatment to ensure the overall durability and sealing performance of the system.

Installation and Maintenance

Installation Guide

  1. Ensure that the connected pipes and fittings are clean, free of burrs, and have intact threads.
  2. Apply an appropriate amount of sealing material (such as PTFE tape or liquid sealant) evenly to the threads, starting from the root of the thread and winding in the same direction as the thread rotation.
  3. Hand-tighten the male threaded pipe into the female threaded port of the Tee Fig 130 BSPT until it is snug.
  4. Use two wrenches: one to hold the Tee Fig 130 BSPT body and the other to tighten the pipe until the specified torque is reached. Ensure a tight seal but avoid over-tightening to prevent cracking.
  5. After installation, perform a pressure test to check for leaks at all connections.

Maintenance Tips

Inspection Schedule:It is recommended to conduct a visual inspection of the fittings quarterly to check for signs of corrosion, deformation, cracks, or leaks. In corrosive environments, the inspection interval should be shortened to monthly.

Cleaning Method:Wipe the surface with a clean, soft cloth to remove dust and dirt. Avoid using wire brushes or chemical solvents, as they may damage the surface anti-corrosion coating.

Replacement Cycle:Under normal operating conditions, malleable iron fittings have a service life of 15-20 years. If severe corrosion, structural deformation, or performance degradation is found, replace them immediately.

Related Products

  • Malleable Iron 90° Male/Female Elbow:Used for pipeline redirection, and can be used with Tee Fig 130 BSPT s to build complex pipe network systems.
  • Malleable Iron Coupling:Used to connect two pipes of the same diameter.
  • Malleable Iron Union:Facilitates the disassembly and maintenance of pipes.
  • Fire Sprinkler Head:Forms a complete fire sprinkler system together with Tee Fig 130 BSPT s, pipes, etc.
  • Pipe Hangers:Used to support and secure the piping system to ensure its stability.

Recommendation:By combining this Malleable Iron Female Tee Fig 130 BSPT  with our 90° Male/Female Elbow, Coupling, and Fire Sprinkler Head, you can build an efficient and reliable fire sprinkler piping system, providing comprehensive fire protection for your building.

FAQ

  • Can you supply OEM?

OEM is available. We can customize the product according to your specific requirements, including logo printing and packaging design.

  • What’s the MOQ?

The MOQ is 500 pieces. For customized products with special sizes or surface treatments, the MOQ may vary.

  • How about the order processing and lead time?

After order confirmation and receipt of the advance payment, we will arrange production. Generally, the products can be ready for shipment within 15-20 working days. Once dispatched, we will notify you and provide all necessary documents for customs clearance.

  • What quality will be ensured?

All products are 100% new and undergo strict quality inspections, including pressure testing and dimensional checks, before delivery. We use sturdy wooden crates or cartons to ensure the products are well-protected during transportation.

  • Can you guide the installation?

Yes, we provide detailed installation instructions in English and other major languages. Our technical support team is also available for online consultation and guidance if needed.

Contact Information

Sales Inquiry:
Provide contact information for sales inquiries.

Email: [email protected]

Phone: +86 13012223295

Technical Support:

If you have any questions regarding product installation, commissioning, operation or maintenance, please contact our technical support team for professional assistance:

Email: [email protected]

Related products

Malleable Iron 90° MaleFemale Elbow BS EN 10242 BSPT Fig 92
alleable Iron 90°Male/Female Elbow Fig 92 BSPT BS EN
Malleable Iron 90° Street Bend m&f Threaded BS EN BSPT Fig 1 Balck
Malleable Iron 90° Street Bend Fig 1 BSPT M&F Threaded BS EN
Malleable Iron Locknut Threaded BS EN BSPT Fig 310
Malleable Iron Backnut Fig 310 BSPT Threaded BS EN
Malleable Iron 45° Street Bend Threaded BS EN Fig 40 galv
Malleable Iron 45° Street Bend Fig 40 BSPT Threaded BS EN

FLUID TECH PIPING SYSTEMS (TIANJIN) CO.,LTD

Address: