This malleable iron 90° reducing Elbow Fig 90R DIN beaded is manufactured in accordance with general standards. It is used for 90° turning connection between different pipe diameters in piping systems, realizing diameter change and direction change at the same time. Made of high-quality black heart malleable iron with high-temperature annealing, it features good toughness, high strength and impact resistance. The beaded structure strengthens the pipe end, with high-precision threads and reliable sealing. It is available in black, electro-galvanized or hot-dip galvanized finish, corrosion-resistant and easy to install, widely used in water, gas, steam, fire protection and various low-pressure fluid piping systems.
Malleable iron 90°reducing elbow is used to connect two pipes of different size by threaded connection, so to make the pipeline turn 90-degree for changing the fluid flow direction.
Standard: DIN / ASTM
Type: 90° Reducing Elbow Fig 90R DIN Beaded
Material: Black Heart Malleable Iron
Pressure Class: 150LB / 300LB
Temperature Range: -20℃ ~ 230℃
Thread Standard: DIN 2999 / NPT / BSP
Surface Treatment: Black / Electro-galvanized / Hot-dip Galvanized
Applicable Media: Water, hot water, oil, gas, compressed air, fire water, low-pressure steam
| Size | Inch | 3/8X1/4 | 1/2X1/4 | 1/2X3/8 | 3/4X3/8 | 3/4X12 |
| mm | 10X8 | 15X8 | 15X10 | 20X10 | 20X15 | |
| Dim | A | 23 | 26 | 26 | 28 | 30 |
| (mm) | ||||||
| B | 23 | 26 | 26 | 28 | 31 | |
| Size | Inch | 1X1/2 | 1X3/4 | 11/4X1/2 | 11/4X3/4 | 11/4X1 |
| mm | 25X15 | 25X20 | 32X15 | 32X20 | 32X25 | |
| Dim. | A | 32 | 35 | 34 | 36 | 40 |
| (mm) | ||||||
| B | 34 | 36 | 38 | 41 | 42 | |
| Size | Inch | 11/2X1/2 | 11/2X3/4 | 11/2X1 | 11/2X11/4 | 2X1/2 |
| mm | 40X15 | 40X20 | 40X25 | 40X32 | 50X15 | |
| Dim. | A | 36 | 39 | 42 | 46 | 38 |
| (mm) | ||||||
| B | 42 | 44 | 46 | 48 | 48 | |
| Size | Inch | 2X3/4 | 2X1 | 2X1/4 | 2X11/2 | 21/2X1 |
| mm | 50X2 | 50X25 | 50X32 | 50X4 | 65X25 | |
| Dim. | A | 40 | 44 | 56 | 52 | 56 |
| (mm) | ||||||
| B | 50 | 52 | 58 | 55 | 63 | |
| Size | Inch | 21/2X1/2 | 3X21/2 | 21/2X2 | 3X1/2 | 3X2 |
| mm | 65X40 | 80X65 | 65X50 | 80X40 | 80X50 | |
| Dim | A | 64 | 82 | 61 | 58 | 73 |
| (mm) | ||||||
| B | 69 | 85 | 66 | 72 | 78 | |
| Size | Inch | 4X21/2 | 4X3 | |||
| mm | 100X65 | 100X80 | ||||
| Dim. | A | 78 | 84 | |||
| (mm) | ||||||
| B | 90 | 92 |
Fire Protection Systems: 90° reducing turning connection for different pipe diameters in sprinkler networks
Water Supply & Drainage: Reducing turning installation for building pipelines
HVAC & Heating: Reducing pipeline turning connection for boiler and radiator systems
Industrial Pipelines: Reducing transition for compressed air and steam pipelines
Gas Engineering: Turning connection for different pipe diameters in gas pipelines
Marine & Mining: Reducing turning installation for low-pressure fluid pipelines
Inspect the 90° reducing Elbow Fig 90R DIN beaded before installation to ensure no cracks, deformation and intact beads and threads
Clean impurities on threads of fittings to ensure clean connection
Wind PTFE tape clockwise or apply pipe thread sealant on male threads
Tighten the Elbow Fig 90R DIN evenly with a wrench to proper sealing, avoid overloading
Pressure test after installation; put into use only after confirming no leakage
Regularly check the Elbow Fig 90R DIN for leakage, looseness and corrosion
Apply anti-rust treatment in outdoor or humid environments to extend service life
Replace in time if cracks, bead damage, thread slipping or seal failure occurs
Malleable iron 90° Elbow Fig 90R DIN beaded
Malleable iron 45° Elbow Fig 90R DIN beaded
Malleable iron equal tee beaded
Malleable iron reducing tee beaded
Malleable iron street Elbow Fig 90R DIN beaded
Full range of DIN & ASTM malleable iron pipe fittings
OEM is available. We can customize the product according to your specific requirements, including logo printing and packaging design.
The MOQ is 500 pieces. For customized products with special sizes or surface treatments, the MOQ may vary.
After order confirmation and receipt of the advance payment, we will arrange production. Generally, the products can be ready for shipment within 15-20 working days. Once dispatched, we will notify you and provide all necessary documents for customs clearance.
All products are 100% new and undergo strict quality inspections, including pressure testing and dimensional checks, before delivery. We use sturdy wooden crates or cartons to ensure the products are well-protected during transportation.
Yes, we provide detailed installation instructions in English and other major languages. Our technical support team is also available for online consultation and guidance if needed.
Sales Inquiry:
Provide contact information for sales inquiries.
Email: [email protected]
Phone: +86 13012223295
If you have any questions regarding product installation, commissioning, operation or maintenance, please contact our technical support team for professional assistance:
Email: [email protected]
